Alumax L-523 - Manual (Page 13)

INSTRUCTION MANUAL
SUPPORT BARS INSTALLATION
2a
2
2a. Take apart the end component of the
support bar with the provided Allen Key.
2b. Transfer the position of the bottom clip
(5) to the back wall. At 82” from the
threshold mark the position (center of the
cylinder A) for the support bar end
component mounting.
2c. Drill the back wall using a 1/4”drill bit.
2d. Apply a bead of silicone in each hole and
insert the wall plugs. Proceed to fasten the
wall end components onto the wall.
2e.
ø
To ease subsequent installation on the front
panel. Insert bar (3) in the component wall
(A) on a horizontal plane as shown.
Tighten the set screws.
MIN 82” | MAX
. 82 1/4”
DIST
ANCE FROM TOP OF THRESHOLD TO CENTER OF W
ALL END COMPONENT
2c
2e
2d
WALL END COMPONENT
3
5
3
A
10
A
B
A
B
2b
503X, 513X, 523X, 523TBX