Alumax 694 - Manual (Page 6)

EPH-N00-06064
3-8-04
Page 6 of 6
7
Wipe the shower walls and sill, and shower door
assembly with a clean, dry cloth to remove any dust or
debris. Apply a 1/4" bead of caulk along the inside of both
wall jambs at the wall surface, along the inside of the curb
at the shower sill surface, and between the curbs and
vertical rails.
The Care and Cleaning of your new A
LUMAX
Bath Enclosure. The simplest and
preferred method of cleaning your unit is by washing it with clean water and drying with a soft
cloth. If soil is still present after drying, a non-abrasive cleanser with a pH of seven to eight
may be used. Comet Bathroom Cleaner
® has been tested and is recommended by the Bath
Enclosure Manufacturers Association (BEMA). Do not use scouring pads, sharp instruments,
or acid-based cleansers to clean the unit.
Thank you for choosing an A
LUMAX
Bath Enclosure. Please take a moment to
complete and return the enclosed Customer Response Card. The information you provide
helps us improve the quality of our products and provide better service to you, our customer.