Alumax 391 - Manual (Page 12)

EPH-N00-06009
5-20-97
Page 11 of 11
22
Carefully caulk the interior jamb-to-wall
and curb-to-base joints. For appearance, you may
wish to caulk the exterior joints as well. We
recommend you wait twenty-four hours before the
first shower to allow the caulking to cure properly.
The Care and Cleaning of your new A
LUMAX
Bath Enclosure. The simplest
and preferred method of cleaning your unit is by washing it with clean water and
drying with a soft cloth. If soil is still present after drying, a non-abrasive cleanser
with a pH of seven to eight may be used. Comet Bathroom Cleaner
® has been
tested and is recommended by the Bath Enclosure Manufacturers Association
(BEMA). Do not use scouring pads, sharp instruments, or acid-based cleansers to
clean the unit.
Thank you for choosing an A LUMAX Bath Enclosure. Please take a moment
to complete and return the enclosed Customer Response Card. The information
you provide helps us improve the quality of our products and provide better
service to you, our customer.