Clarion AM/FM CD PLAYER XMD2 - Manual (Page 8)

8
XMD1/XMD2
For 5-inch (12 cm) CD For 3-inch (8 cm) single CD
CD MODE OPERATION
CD Mode Operations
Loading a Disc
Open the door by push up the hook.
Insert the disc into the CD insertion slot with its label side up and
completely close the door, then the CD will start playing.
∗
When inserting a single CD (3”(8 cm)), insert it from the center of the slot.
∗
When inserting a single CD (3”(8 cm)), do not connect an adapter.
∗
Press the DISP button % , then the display will show the play time.
Track No. ➝ Play time ➝ Clock ➝ Track No.
Notes:
• Some CDs recorded in CD-R mode may not be usable.
• Even when recorded in CD-RW mode, some CDs may not be us-
able.
Listening to the Disc already Inserted
Press the FUNC button 4 to select the CD mode, the CD will start
playing.
Stopping (pausing) Playback
Press the Play/Pause button ! .
Press the Play/Pause button ! again to resume playback.
Ejecting the CD
Open the door by push up the hook.
Press the Eject button
2 , then the CD will be ejected.
Note:
• If the ejected CD is left as it is, it will be reloaded after 15 seconds.
However, single CDs will not be reloaded, so make sure to remove
them.
Top Function
Press the TOP button $ , then the CD will start playing from the first
song (track number 1).
Selecting Tracks (songs)
Press the SRCH Left/Right button @ .
d : Playback will start from the next track.
a : Playback will start from the beginning of the track currently
playing. When this button is pressed again, the CD will play
from the previous track.
Fast-Forward and Fast-Backward
Press and hold the SRCH Left/Right button @ .
d : To fast-forward
a : To fast-backward
∗
Pressing the SRCH Left/Right button for 1 second or longer will move for-
ward or backward 5 times faster than normal play, and pressing it for 3
seconds or longer will do the operation 30 times faster.
Scan Play (Intro Music Scan)
Press the SCN button 6 , then the display shows “SCN”, then the
CD will play the first 10 seconds of each track of the whole disc.
Press the SCN button
6 again to disengage the unit from scan play.
∗ A scan play will start from the track following the one currently playing.
Repeat Play
Press the RPT button 7 , then the display shows “RPT”, then the
track currently playing will be played repeatedly. Press the RPT but-
ton
7 again to disengage the unit from repeat play.
Random Play
Press the RDM button 8 , then the display will show “RDM”, then the
entire tracks on the disc will be played at random. Press the RDM
button
8 again to disengage the unit from random play.
CD Changer Mode Operations (Only XMD1)
Listening to the Disc
Press the FUNC button 4 and select the CD changer mode, then
the CD starts playing.
CD CHANGER MODE OPERATION
Stopping (pausing) Playback
Press the Play/Pause button ! .
Press the Play/Pause button ! again to resume playback.
Selection of CDs
Press the Direct button (1 to 6) 5 then select the CD you wish to
play.
Selecting Tracks (songs)
Press the SRCH Left/Right button @ .
d : Playback will start from the next track.
a : Playback will start from the beginning of the track currently
playing. When this button is pressed again, the CD will play
from the previous track.
Fast-Forward and Fast-Backward
Press and hold the SRCH Left/Right button @ .
d : To fast-forward
a : To fast-backward
∗
Pressing the SRCH Left/Right button for 1 second or longer will move for-
ward or backward 5 times faster than normal play, and pressing it for 3
seconds or longer will do the operation 30 times faster.