Getting started, Figure 2, Figure 3 – Clarity Amplified Telephone C35 User Manual

Page 10

M10

M11

Connecting your Telephone

1. Carefully remove your telephone from its box. If there

is any visible damage, do not attempt to operate this

equipment. Return it to the place of purchase.

2. Check to be sure that you have all items that come

with your C35 telephone. You should have a Hand-

set, Base Unit, Mounting Bracket, Handset Line Cord,

and Telephone Line Cord, User Guide and 4 AA batter-

ies.

Choosing a Location

• The C35 requires a modular phone jack

• The unit should be located in an area where it is easy
to see the lighted ringer.

• Choose a location that is out of the way of

normal

activities.

• The unit can be used as a desk top phone or wall
mount

phone.

Desk Mounting Instructions

Follow these instructions to place the phone on a desk or
table top using the supplied bracket.

1. Plug one end of the long fl at telephone line cord into

the jack marked LINE located on the back of the

telephone. Plug the other end into the telephone wall

jack. See Figure 2

2. Plug one end of the modular coiled handset cord into

the handset. Plug the other end into the jack located

on the left side of the telephone. Place the handset in

the cradle. See Figure 3.

GETTING STARTED

Figure 2

M10

M11

Figure 3