beautypg.com

Canon YJ12X6.5B IRS-A User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

------------------------------ FCC REGULATIONS ----------------------------------

^

(NOTE) : This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference, when the equipment

is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the operation manual, may cause harmful

interference to radio communications. Operation to this equipment in a residen­

tial area is likely to cause harmful interference in which case the user will be

required to correct the interference at has his own expense.

• Use of shielded cable is required to comply with Class A limits in Subpart B

of Part 15 of the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise

specified in the manual. If such changes or modification should be made, you

could be required to stop operation of the equipment.

----------------Canadian Radio Interference Regulations-----------------------

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet appareil mumérique de la class A respecte toutes les exigences du Réglement sur le

matériel brouilleur du Canada.

C i

We, Canon Inc., in Japan and Canon Enropa N. V., in The Netherlands, confirm that the YJ12x6.5B

IRS-A

series zoom lens is in conformity with the essential requirements of EC Directive(s)

89/336/EEC, and 93/68/EEC

by appl

3

ong the following standards

EN55103-1, and ENS5103-2

Note:

a) Applicable Electromagnetic Environment:

El (Residential area)
E2 (Commercial and light industrial area)
E3 (Urban outdoors area)

b) Use of shielded cable is required to comply with limits specified by above standards.