Canon YJ12X6.5B IRS-A - Manual (Page 26)

# Shuttle-Shot Function
By simply pressing the ShtI button, you can zoom to a shuttle memory position (preset
zoom position) at the maximum speed. When the ShtI button is released, the zoom
returns to the original position. In other words, this allows the zoom to shuttle between
two zoom positions (shuttle memory and original positions) at the maximum speed.
Shuttle Shot Operation Diagrams
• Basic Movement of the Shuttle Shot Operation
(Example)
Position
I
Operation]
• While the ShtI button Is held down, the zoom moves toward the shuttle memory position (preset zoom
position) at the maximum speed. Once the zoom reaches to this point, the zoom stops and stays there,
so long as the ShtI button Is held down.
Shuttle memory position
-------------
Original position
8
I
The ShtI button
is
held dowrT]-—►
• When the ShtI button is released, the zoom returns automatically to the original position.
Shuttle memory position Original position
8
I
The ShtI button is released ]
-►o
How to store the shuttle memory position
To set the zoom position, hold down
the ShtI button and simultaneously
turn the shuttle memory position
setting knob either of the following
positions to adjust.
• Clockwise (T side):
The further the switch is turned
clockwise, the more the focus
is taken further and further
away (in the telephoto mode).
• Counterclockwise (W side):
The further the switch is turned
counterclockwise, the more
the focus is brought closer and
closer (in the wide angle mode).
54