Chief Manufacturing FSD-4100 - Manual (Page 10)

Installation Instructions FSD-4100
9
Right and Left 110 Degree Rotation
1. Using an Allen wrench (provided), remove the 35 degree stop
(see Figure 11).
2. Turn the base 110 degrees in one direction to its stop (see
Figure 12).
3. Neatly and carefully, wrap power/audio/video cables twice
inside base with no slop or slack in cables (see Figure 13).
4. Route power/audio/video cables out access hole in base.
5. Secure cables to base using a tie wrap (70).
6. Trim excess from tie wrap.
7. Install cable cover (10B) on arm and secure using screw (see
Figure 10).
8. Install base cover (10A) on base and secure using two screws
(see Figure 10).
35 Degree Stop
Figure 11. Remove 35 Degree Stop
110 Degrees
Figure 12. Rotate 110 Degrees
Figure 13. Wrap Cables In Base