Canon 155 A User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

by half an f/stop. This will, however,

have no effect on exposure which will take

place at the aperture set on the flash.
There is also a possibility that the

aperture displayed in the finder may flash

on and off if the aperture set on the flash

coincides with the maximum aperture

of the lens. In this case it does not indicate

underexposure. Exposure will be correct.

However, it is advisable to check the

aperture on the flash to make sure it is

not larger than the lens’ maximum

aperture.