Canon 155 A User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

setting of the AE mode selector and the AT

dial. This is possible only when the AE ex

posure is within the AE coupling range. Once

the pilot lamp relights, the camera will

automatically switch back to AE flash

photography. This means that you can shoot

continuously if necessary while the camera

alternates between the AE flash mode and

the normal AE mode.

Switching Off

Set the main switch at OFF after completion

of flash photography in order to prevent

battery drain. The connecting circuit be

tween the flash unit and camera is cut off

when the main switch is set at OFF, and

normal AE photography can be performed

with the flash unit still attached to the