Canon 420 EZ User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•Bounce flash can also be used with
various shooting nnodes. (see pp.14-21
for setting and exposure information.)
Confirm exposure before shooting be
cause the actual shooting distance is a
total of the flash-to-reflecting surface
distance and the subject-to-reflecting
surface distance.
•In bounce flash only, the flash head
emits the visible preflash instead of the
near-infrared light.
•When tilted for bounce flash, the flash
head automatically sets to 50mm and
the display The bounce mark
{%)
also appears in the display panel. It is
also possible to set the flash head posi
tion manually.
•The zoom head swivels 90° upward,
180° to the left and 90° to the right in
any combination. Click stop positions
are provided for extra convenience. To
swing the flash horizontally, first slide
the bounce latch upward and then
rotate the flash left or right.
28