Ready lamp and test firing, Ready lamp and test firing ......... p. 8 – Canon 420 EZ User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3. Ready Lamp and Test Firing

Turn the main switch ON (“I” mark) and

wait for the ready lamp to light up. To test

functioning, press the ready lamp after it

has lit and if the flash fires it is in proper

working order.

• Be sure to press the ready lamp before press

ing the shutter button halfway. Otherwise, test

firing is not possible.

• Flash charge is also confirmed by the “

i ”

mark in the viewfinder.

• When the shutter button is pressed halfway,

the flash head position automatically adjusts,

(see p.10)

•

For interval flash photography, attach the

Technical Back E and set the mode to the in

terval timer or self-timer. The flash charge

starts automatically one minute before shutter

release.