Nikon AI-S TC-16- TC-16S - Manual (Page 21)

• Do not subject the TC-16 to shocks—especially avoid dropping or banging
it on anything hard.
• If condensation forms on the TC-16 body, wipe it with a dry soft cloth. If it
forms on the lens itself, observe the following—
use a blower brush to clean all glass surfaces; as much as possible avoid
using lens tissue. Gently wipe dirt, smudges or fingerprints with soft cotton
moistened with a small amount of absolute alcohol, using a spiral motion
from center to periphery, Make sure you leave no wiping traces.
If you use ether in cleaning the lens surface, smudges may appear on the
surface: should this happen, wipe the smudges with a cotton cloth mois­
tened with absolute alcohol.
• Attach both front and rear fens caps BF-1 and LF-1 to your TC-16 when stor­
ing it separately, preferably inside the optional lens pouch No. 61; also, avoid
storage in a high-temperature and high-humidity place.
ACCESSORIES
Supplied Optional
Front lens cap BF-l
Rear lens cap LF-1
Flexible lens pouch No. 61
SPECIFICATIONS
Lens construction:
Focal length:
Aperture coupling range:
Effective aperture:
Focusing:
Power switch:
Battery source:
Focus lock:
Diaphragm:
Exposure measurement:
Reproduction ratio:
Depth of field:
Mount:
Dimensions:
Weight:
5 elements in 5 groups
1.6X that of lens in use (with in-focus at infinity)
f/1-8 to t/32
f/2,9 to f/51
Via built-in micro motor to move all lens groups
Provided; "ON/OFF" type
Via electrical contact pins directly from (he
battery power inside DX-1 AF Finder
Possible via one focus lock button provided
Automatic diaphragm coupling provided
Via full aperture method; meter coupling ridge
provided
1.6X that of lens in use
1/1,6X that of lens in use (with in-focus at
infinity)
Nikon F mount (for both sides); AF electrical
coupling pins provided on the rear side
Approx, 88mm dia. x 43.8mm long (overall):
21 mm extension from flange
Approx. 285g