Accessories and attachments – Craftsman 836.27233 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3-Prong Plug

Figure B

Grounding Lug

Grounding Prong

Properfy Grounded

3-Prong Outlet

Adapter

Make Sure This

is Connected to a

Known Ground

2-Prong

Receptacle

FIGURE (A)

Shows a 3-wire electrical

plug and outlet that has a grounding
conductor. If a properly grounded outlet
is not available, an adapter

(FIGURE B)

can be used to temporarily connect
this plug to a 2-contact ungrounded
outlet. The adapter

(FIGURE B)

has a

rigid lug extending from it that MUST
be connected to a permanent earth

ground, such as a properly grounded
outlet box. The Canadian Electrical

Code prohibits the use of adapters.

USE ONLY 3-WIRE EXTENSION

CORDS THAT HAVE 3-PRONG

GROUNDING PLUGS AND 3-POLE

RECEPTACLES THAT ACCEPT THE

TOOL’S PLUG.

A WARNING

If you have any doubts as to whether

the tool is properly grounded or if the
grounding instructions are unclear,
check with a qualified electrician or
service technician.When using a

grounded tool around other ungrounded
devices, be sure that the ungrounded
devices are in good condition. An
ungrounded device can function, yet
have internal electrical problems that
could cause a hazard when brought in
contact with a grounded tool.

THE ADAPTER SHOULD ONLY BE USED
until a properly grounded outlet can

installed by a qualified electrician.

ACCESSORIES AND ATTACHMENTS

AVAILABLE ACCESSORIES

Visit your Sears Hardware Department
or see the Craftsman Power and

Handtool Catalog for the following
brad nails;

Sears Stock No.

Inch .

mm.

27218

3/8

27216

3/4

27215

27214

1-3/16

These brad nails can be used for;

Cabinet making

Interior decorations

Wood furniture building/repair

Display assembly

Picture frames
Door & window trim

NOTE: Use only brad nails
recommended for this nailer. Using
other sizes may be dangerous.
Sears may recommend other
accessories not listed in this manual.

Do not use accessories unless you
have completely read the instruction
manual for that accessory.

AWARNING

Do not attempt to modify this tool or

create accessories not recommended
for use with this tool. Any such
alteration or modification is misuse
and could result in a hazardous

condition leading to possible serious

personal injury.

Page 6