Spectfic safety instructions for this nailer, Grounding instructions, Save these instructions – Craftsman 836.27233 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECtFIC SAFETY INSTRUCTIONS
FOR THIS NAILER
A WARNING
DO NOT AIM NAILER OR SHOOT
NAILS AT A PERSON OR ANIMAL.
Released nails can cause severe injuries.
1. USE ONLY THE NAILS INDICATED
in this manual. Use of accessories
that are not designed for this tool
could result in personal injury and/or
damage to the tool.
2.
DO NOT TOUCH
metal parts of tool
during operation. Hold only plastic
handle or housing.
3. KEEP
tacking speed at one nail
per second.
4. NAILER
should be used only for
the purposes outlined in this manual.
It is designed for use on wood.
Do not use on hard surfaces like
rock, concrete, etc. personal injury
or damage to the tool could result.
5. When nailing thin wood,
special
caution must be taken for
possible penetration of naiis
through the wood.
6. When using this tool in high '
locations, ALWAYS make sure there
is no one below that could be
injured.
ALWAYS
be sure you have
a firm footing when using this tool.
7.
ALWAYS
hold tool firmly.
8.
NEVER
connect tool to a DC
power source.
9. REGULAR CLEANING,
inspection
and maintenance is necessary.
10.OUR1NG OPERATION,
the nailer
may feel warm to the touch. This is
normal. However, if the nailer starts
to feel hot, discontinue use until the
unit cools down.
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION
OR BREAKDOWN,
grounding provides
a path of least resistance for electric
current to reduce the risk of electric
shock. This tool is equipped with an
electric cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into a
matching outlet that is properly installed
and grounded in accordance with all
local codes and ordinances.
DO NOT MODIFY THE 3-PRONG
PLUG.
If it will not fit the outlet, have the
proper outlet installed by a qualified
electrician. Improper connection of the
equipment-grounding conductor can
create a risk of shock. The conductor
with insulation having an outer surface
that is green (sometimes, but not always
with yellow stripes) is the equipment
grounding conductor.
REPAIR OR REPLACE DAMAGED OR
WORN CORD IMMEDIATELY,
if repair
or replacement of the electric cord or
plug is ever necessary. DO NOT connect
the equipment-grounding conductor to
a live terminal.
SAVE THESE INSTRUCTIONS
Page 5
.