Craftsman 836.27233 - Manual (Page 4)

13. DtSC0NNECTT00L when not in
use, before servicing and when
ioading or changing accessories.
14. AVOID UNINTENTIONAL
STARTING. Never carry tool with
your finger on the switch.
15.STAY ALERT. Watch what you are
doing and use common sense. Do
not operate tool when you are tired
or under the influence of drugs,
alcohol, or medication.
16. CHECK D mi ' ki AGED PARTS, Before
using too!, check that ail parts will
operate correctly and will perform as
designed. Any damaged parts
should be repaired or replaced by
an authorized Sears service facility.
Also, check for misalignment,
binding, and broken parts. Check
that the switch works properly and
DO NOT USE TOOL IF THE
SWITCH DOES NOTTURNTHE
TOOL ON AND OFF.
17. REPLACEMENT PARTS, When
servicing, use only identical
replacement parts ordered from a
Sears service facility.
18. WEAR HEARING PROTECTION
during extended periods of
operation.
GUIDELINES FOR
EXTENSION CORDS
If you are using an extension cord
outdoors, be sure it is marked with the
suffix “W-A" (“W” in Canada) to indicate
that it is acceptable for outdoor use.
Be sure your extension cord is
properly wired, and in good electrical
condition. Always replace a damaged
extension cord or have it repaired by a
qualified person before using it.
Protect your extension cords from
sharp objects, excessive heat and
damp or wet areas.
SAVE THESE INSTRUCTIONS
Page 4