Craftsman 315.269600 - Manual (Page 8)

FEATURES
KNOW YOUR TRIM SAW
See Figure 2.
Before attempting to use any tool familiarize yourself
with all operating features and safety requirements.
Features include easily operated bevel cut and depth
of cut adjustment mechanisms; positive 0“ bevel stop:
spindle lock; and blade wrench storage.
A WARNING; If any parts are missing, do not
operate tool until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
SWITCH
See Figure 2.
Your saw is equipped with a lock-off button which
reduces the possibility of accidental starting. The lock-
off button is located on the handle above the switch
trigger. You must depress the lock-off button in order
to pull the switch trigger. The lock resets each time
the trigger is released. Note: You can depress the
lock-off button from either the left or right side.
APPLICATIONS
(Use only for the purpose listed below)
■ Cutting all types of wood products (lumber,
plywood, paneling).
RIP
GUIDE SCREW
(WING SCREW) LOCK-OFF
BUnON
SPINDLE
LOCK BUTTON
BUDE WRENCH
STORAGE AREA
BUDE WRENCH
(SmtnHEXKEY)
DEPTH OF
CUT ADJUSTMENT
(DEPTH ADJUSTMENT KNOB)
SWITCH
TRIGGER
UPPER
BUDE GUARD
BEVEL CUT
ADJUSTMENT
(BEVEL ADJUSTMENT KNOB)
LOWER
BUDE GUARD
BASE
ASSEMBLY
Fig. 2