Product specifications, Unpacking, Accessories – Craftsman 315.269600 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PRODUCT SPECIFICATIONS

Blade Diameter

Blade Arbor

Cutting Depth at 0° Bevel Cut

Cutting Depth at 45° Bevel Cut

5-1/2 in.

3/8 in.

1-9/16 in.

1-1/8 in.

No Load Speed

Motor

Charge Rate

Charger Rating

3,800 RPM

14.4 Volts DC

1 Hour

120 volts, 60 Hz, AC

UNPACKING

Your trim saw has been shipped completely
assembled except for the blade. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. If any parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts be>fore attempting to operate saw. A
blade, blade wrench, and this owner's manual are also
included.

WARNING:

If any parts are missing, do not

oprerate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.

ACCESSORIES

The following recommended accessories are currentlj^bvailable at Sears Retail Stores.

■ 5-1/2 in. Thin Kerf Blade

^ WARNING:

The use of attachments or accessories not listed might be hazardous.