Craftsman 315.273731 User Manual

Page 57

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TROUBLESHOOTING

PROBLEM

CAUSE

SOLUTION

Saw blade tends to push wood to
one side when cross cutting.

1. Blade is heeling.

1. See Squaring the Blade to the

Fence in Adjustments section.

2, Column tube is loose in column

support.

3. Arm is loose or misaligned.

2. See Adjusting the Column

Tube in Assemfo/y section.

3. See Setting the Arm Lock

Wheel in the AssemWy section.

4. Fence/tables are not straight.

4. Check with square; sand or

replace.

5. Blade or teeth are bent or dull

5. Sharpen or replace the blade.

See the removal procedure in

Assemb/y section.

CRAFTSMBN*

RADIAL SAW 315.273731