Craftsman 315.273731 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LOOSE PARTS LIST
5. Saw Base To Leg Stand Assembly
9, Fence.....................................................................
A. Saw Assembly (not shown)...........................1
B. Leg Stand Assembly (not shown)................. 1
C. Hex bolt (5/16-18 x 5/8 in. Hex Head)...........4
D. Washer (5/16 in.)........................................... 8
E. Lock washer (5/16 in.)................................... 4
F. Hex Nut (5/16-18).......................................... 4
Check all loose parts from the box with the list below. Use the instructions on the following pages to assemble.
All fasteners are shown actual size.
C
D
6
.
Hardware for Front Table
A. Front table..................................................... 1
B. Screw (1/4-20 x 1 in.).................................... 4
C. Washer (1/4 in.)............................................. 4
D. Lock washer (1/4 in.).....................................4
E. Hex nut (1/4-20).......................................... 4
7. Rear Table.
10. Leveling Hardware for Front Table
A. Screw (1/4-20
X
1-3/4 in.).............................. 1
B. Washer.......................................................... 1
C. U-clip............................................................. 1
D. Setscrew....................................................... 1
E. Tee nut.......................................................... 1
(CD
C
D
E
11. Scale Indicator
A. Screw............................................................. 4
B. Speed Nut.................................................... 2
C. Indicator.........................................................2
D. Switch Key....................................................2