Product specifications, Maintenance agreement, Customer responsibilities – Craftsman 580.751651 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONGRATULATiONS on your purchase of a Sears Crafts
man high pressure washer. It has been designed, engi
neered and manufactured to give you the best possible
dependability and performance.
ihould
you
experience
any
problem
you
cannot
easily
•jmedy, please contact your nearest Sears Service Cen-
•ir/Department or call the 1-800 number listed on the front
J this manual. We have competent, well-trained techni
cians and the proper tools to service or repair this unit.
Please read and retain this manual. The instructions will
enable you to assemble and maintain your high pressure
washer properly. Always observe the ‘‘SAFETY RULES."
PRODUCT SPECIFICATIONS
MODEL
NUMBER
SERIAL
NUMBER,
580.751651
DATE OF
PURCHASE,
THE
MODEL
AND
SERIAL
NUMBERS
WILL
BE
FOUND ON A DECAL ATTACHED TO THE PRES
SURE WASHER.
YOU
SHOULD
RECORD
BOTH
SERIAL
NUMBER
AND DATE OF PURCHASE AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE.
PUMP PRESSURE
Adjustable to 2200 psl
FLOW RATE
3gpm_________________
DETERGENT MiX
Use undiluted detergent
DETERGENT RATIO
Adjustable to 73:1
WATER SUPPLY
TEMPERATURE
Not to exceed 140°F
SUCTION HEIGHT
3 FT. maximum
Engine Specifications
ENGINE MODEL
GN-Series
RATED HORSEPOWER
6.5
DISPLACEMENT
190CC
SPARKPLUG: Type:
Set Gap To.
Champion RC12YC
or equivalent
0.030 inch (0.76mm)
GASOLINE CAPACITY
1 U.S. gallon
OIL (20 oz. capacity}
SAE 30 weight
SOLID STATE IGNITION
AIR GAP
0.0125 inch
MAINTENANCE AGREEMENT
A Sears Maintenance Agreement Is available on this prod
uct. Contact your nearest Sears store for details.
CUSTOMER RESPONSIBILITIES
« Read and observe the safety rules.
6 Follow regular schedule in maintaining, caring for and
using your high pressure washer.
• Follow the instructions under “Customer Responsibili
ties“ and “Storage” sections of this Owner’s Manual.
NOTE: The engine of the pressure washer is ©quipped with
a spark arrestor muffler. The spark arrestor must be main
tained in effective working order by the owner/operator.
in the State of California a spark arrestor is required by taw
(Section 4442 of the Cailfomia Public Resources Code}.
Other states may have similar laws. Federal laws apply on
federal lands.