Craftsman 536.797500 - Manual (Page 15)

CLEANING
Always remove the dirt and debris from the mini tiller/
cultivator after each use (see Fig, 11) Remove atiy
string, wire or vegetation that may become lodged in the
mechanism and stop the tine rotation Proceed as fol­
lows;
® Release the throttle control and move the shut-off
switch to the OFF position, then disconnect the spark
plug wire
® Remove the hairpin and clevis pin securing the tine(s)
assemb ly to I he shaft and re move the tine (s) (see Fig
11
) .
# Remove the lodged material. Reassemble the tine(s)
on the shaft and secure with a clevis pin and hairpin
@ Reconnect the sparkplug wire and restart the engine
eiJg l?£FONSIBiUTIES
LOOGED ITEM
CLEVIS PINS
RIGHT SIDE ‘
TINES
FRONT VIEW
TINE SHIELD
LEFT SIDE
TINES
HAIRPINS
TRANSMISSION
HAIRPINS
FIG. 11
15