Talkswitch 48-CAS - Manual (Page 4)

Numbering for each unit on the LAN
After successfully changing each unit ID to a unique number, each unit can be identified
by the network. More importantly each local extension, remote extension, and voice
mailbox, has a unique numbering system where the second digit in the three digit
identifier becomes the unit ID number. See the table below.
TalkSwitch Numbering Scheme for Networked Units
Unit ID 1 Unit ID 2 Unit ID 3 Unit ID 4
Local Extensions 111-118 121-128 131-138 141-148
Remote Extensions 211-218 221-228 231-238 241-248
Local Mailboxes 111-118 121-128 131-138 141-148
Remote Mailboxes 211-218 221-228 231-238 241-248
General Mailboxes 410-419 420-429 430-439 440-449
4. INSTALL YOUR TALKSWITCH SOFTWARE
Install the TalkSwitch software on your PC. If you have not done so, you may follow
the instructions on the CD or see the “TalkSwitch User Guide”.
5. OPEN YOUR TALKSWITCH SOFTWARE
Step A
Ensure that a TalkSwitch unit is connected to the PC via the Serial or USB connection.
Alternatively, you can connect the PC to the phone system LAN using a LAN cable.
Details can be found in the “TalkSwitch User Guide”.
Step B
Open the TalkSwitch Configuration Software. Details can be found in the “TalkSwitch
User Guide”. The software will detect the number of units on the LAN.
Step C
In the main window, click on View System Information to view information about
the units in your system.
W W W.T A L K S W I T C H . C O M 4
N E T W O R K I N G T A L K S W I T C H 4 8 - C A s / 4 8 - C V A s
Example: three digit identifier
1 2 5
TalkSwitch unit ID number “2”
“Local Extension”
Extension number “5”