Craftsman 183.172530 - Manual (Page 2)

TABLE OF CONTENTS
SECTION PAGE SECTION PAGE
Warranty......................................................... . 2 Carton Contents....................................
Product Specifications............................... .. 2 Know Your Cutting Tool...................... ........ 8
Power Tool Safety........................................ . 3 Assembly & Operation........................
Cutting Totri Safety...................................... . 4 Maintenance............................................
Electrical Requirements & Safety............... 5 Repair Parts.............................................
Accessories .................................................. . 6 Parts & Service Availabifity................ ........ 18
WARRANTY
FULL ONE YEAR WARRANTY
If this Cutting Tool fails due to a defect in material or workmanship within one year of date of
purchase, Sears will at its option repair or replace it free of charge.
Return this Cutting Tool to a Sears Service Center for repair, or to place of purchase for
replacement.
This warranty gives you specific legal rights, and you may also have other rights which may vary
from state to state.
Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179
A WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are;
• Lead from lead-based paints
■ Crystalline silica from bricks, cement and other masonry products
•
Arsenic and chromium from chemically treated lumber
Your risk from friese exposures varies, depending on how often you do this type of work. To reduce your exposun
to these chemicals, work in a well ventilated area and work with approved safety equipment such as those dust
masks that are specially designed to filter out microscopic particles.
PRODUCT SPECIFICATIONS
Motor Rating................................. 12CA/. 60Hz, AC
Amperes........................................ 5.0 Amperes
2 Speeds (no load)...................... 20000 & 30000 RPM
Motor Horsepower.......... % HP (Maximum Developed)
Weight................................ 1-7 kg
A
WARNING
To avoid electrical hazards, fire hazards or damage to the cutting tool, use proper circuit protection.
This cutting tool is wired at the frictory for 110-120 Volt operation. It must be connected to a 110-120 Volt /15
Ampere time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut
or damaged in any way.
Before using your cutting tool, it is critical that you read and understand these safety rules. Failure to follow these
rules could result in serious Injury to you or damage to the cutting tool.