Awarnino, Awarnirg, Caution – Craftsman 875.199810 User Manual
Page 4: Warning, Awarning, Warnirg
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Owner's Manual
Model No. 875.199810
Disconnect the air tool from air supply
before changing tools or attachments,
servicing and during non-operation.
Do not wear loose fitting clothing,
scarves,
or
neck ties in work area. Loose
clothing may become caught in moving
parts and result in serious personal injury.
Do not wear Jewetry when operating
any tool. Jeweiry may become caught in
movirtg parts and result in serious
personal injury.
Do not depress trigger when connecting
the air supply hose.
Never trigger the tool when not applied
to a work object.
Attachments must be securely
attached. Loose attachments can cause
serious injury.
Protect air lines from damage or
puncture.
Never point an air tool at oneself or any
other person. Serious injury could occur.
Check air hoses for weak or worn
conditions before each use. Make sure all
connections are secure.
A
warnino
A
caution
Release all pressure from the system
before attempting to install, service,
relocate or perform any maintenance.
Keep all nuts, boHs and screws tight
and ensure equipment is in safe working
condition.
Use attachments designed for use with
air powered tool. Always examine
accessories before mounting for chips,
cracks. Or signs of damage.
Never use mounted points or other
accessories that have been drop^ied or
exposed to water, solvent or extreme
temperature changes. It is a good practice
to operate the tool in a protected
enclosure fw one minute alter mounting
any accessory.
AWARNiNG
Always use accessories with an RPM
rating that meets or exceeds the tool
RPM fating.
A
warning
Never carry a tool by the hose
or
pull
the hose to move the tool or a
compressor. Keep hoses away from
heat, oil and sharp edges. Replace any
hose that is damaged, weak or worn.
A
warnirg
Inhalation hazard: Abrasive tools, such
as grinders, sanders and
cut-off foo/s
generate dust
and abrasive materials
which can be harmful to human lungs
and respiratory system. Always wear
MSHA/NIOSH approved, properly fitting
face mask or respirator when using
such
loots.
ENG-4