Awarning, Warning, Important safety instructions – Craftsman 875.199810 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Own&r’s Manual
Model No. 875.199810
Important Safety Instructions
Read Operating Instructions
Please becotne familiar with all the
insirucUons and warriings before
operating any pneumatic tool.
/Uways Wear Approved Eye Protection
Impact resistant
eye
protection should
meet or exceed the standards set forth In
ANSI Z87.1, Occupational and
Educational Eye and Face Protection.
Look tor matWng 287,1 on your eye
protertion to ensure toai it is an approved
style.
Hearing Protection is Recommended
Hearing prolecfion should be used when
the noise level exposure equals or
exceeds an 8 hour time-weighted average
sound level of 85dBA. Process noise,
reflective surfaces, other tools being
operated nearby, all add to the noise level
in
3
given work area, if you are unable to
determine your noise tevet exposure, we
recommend the use of hearing protection.
Avoid Prolonged Exposure to Vibration
Pneumatic tools can vibrate during use.
Prolonged expcsure to vibration or very
repetitive hand and arm movements can
cause injury. Discontinue the use of any
tool if you experience tingling, numbness,
discomfort or pain in your hands or arms.
You should consuK your physician belois
resuming use of tool.
90 PSI Maximum
This tool is designed to operate at an air
pressure of 90 pounds per square iiich
gauge pressure (90 PSI) maximum, at toe
tool.
Use
of
higher air pressure
can, and
may cause injury. Also, the use of higher
air pressure places the internal
components under loads and stresses
they were not designed tor, causirg
premature tool failure.
A
warning
California Prop 6S
Some dust created by power sanding,
sawing, grinding, driiting and other
construcOon activities contains
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these cdtemicals are:
Lead from lead based p^nt, crystaliine
silica from bricks and cement and other
masonry products, arsenic and
chromium from chemically-treated
lumber.
Your risk from those exposures varies,
depenthng on how often you do this
type of work. To reduce your exposure
to these chemicals: work in a well
ventilated area, and work with approved
safety equipment, such as dust masks
that are apedhcaify deigned to filter
out microscopic particles.
EXÍG-3