Connections, Viewing setup, Note – LG 23LX2R User Manual
Page 14: F.'i c.) (0
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installatìofì
DTV Setup
- To watch digitally broadcast programs, purchase and
connect a digital set-top box.
Connections
Connect the digital set-top box video outputs to the
COMPONENT (Y, P
b
, P
r
) jacks and connect the digital
set-top box audio outputs to the AUDIO jacks.
Viewing Setup
1. Turn on the digital set-top box. (Refer to the owner's
manual for the digital set-top box.)
2.
Use the
TV/VIDEO
or
yULTMEDIA
button on the
remote control to select
Component 1.
{.; (Ò
(.'■
f.'i c.) (0
('.) iC ) (V
i
f.'i
f . ' s
DTV Receiver (Set-top Box)
PC Setup
- After setup, be sure
to select PC source on TV.
Connections
1. Set the monitor output resolution on the PC before
connecting to the TV.
2. Connect the TV to the PC with the PC cable.
3. Connect the PC audio output to the TV's PC SOUND
input.
Viewing Setup
1. Turn on the PC.
2. Use the
TV/VIDEO
or
MULTIMEDIA
button on the
remote control to select
PC.
, . J
Monitor Display
Specifications
MODE
ResoUion
Hcsrkaital
Ri«penc^kl-b)
Vaiteal
Frequency(Hi)
VQA
640x480
31.4
60
SVGA
800x600
37.8
60
XGA
1024x768
48.3
60
WXQA
1280X768
47.6
60
1360X768
47.6
60
NOTE
Connect the signal cable (DVI-D cable, Not DVI to D-Sub cable)
from the DVI output socket of the PC to the DVI input socket of
the set when using a PC with DVI output. In some video cards,
DVI-Analog output may not be supported.
NOTES
a.
For optimum picture quality, use standard WX6A 1360x768 computer output at a 60Hz refresh rats. Using other formats
(VGA. SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video ou^jut format,
please refer to the operating manual for the computer you are using).
b. If the message
“Out ol tcinge”
appears on the screen, adjust the PC output to a format listed in the ‘Monitor Display
Specifications' chart above.
0
. The synchronization input form for Horizontal and Vertical frequencies is separate.
DPM (Display Power Management) mode
If
the
PC
goes to power saving
mode,
the monitor automatically switches
to DPM
mode.
If you don't use the PC cable provided, DPM mode may not work.
14