Connection 1, Connection 2, External equipment connections continued – LG 23LX2R User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installatíon

External Equipment Connections Continued

VCR Setup

- In Video mode, TV aytomatically reverts to TV mode if the

FCR

button or

FLASHBK

buttons are pressed.

Connection 1

Set VCR switch to 3 or 4 and then tune TV to the same

channel number.

Connection 2

1. Connect the audio/victeo output jacks on VCR to the corre

sponding input jacks on the TV. When connecting the TV

to a VCR, match the Jack colors (Video = yellow, Audio

Left = white, and Audio Right = red).

2. Insert a video tape Into the VCR and press PLAY on the

VCR. (Refer to the VCR owner’s manual.)

3. Use the

TVAfIDEO

button on the remote control to select

Video.

(If connected to S-VIDEO on side panel, select the

S-Video

external Input source.)

i,-.; f.-.

'■.}

i.'.

Sit- I'.-

Cable TV Setup ^

- After subscribing to a local cable TV service and installing a converter, you can watch cable TV programming.

- For further cable TV information, contact a local cable service provider.

Connection 1

1. Select 3 or 4 with channel switch on cable box.

2. Tune the TV channel to the same selected output channel

of cable box.

3. Select channels at the cable box or with the cable box

remote control.

Connection 2

1. Connect the audio/video output jacks on Cable Box to the

corresponding input Jacks on the TV. When connecting

the TV to Cable Box, match the jack colors

(Video

yellow. Audio Lett

= white,

and Audio

Right =

red).

Use the

TV/VIDEO

button on the remote control to select

Video.

Select channels with the cable box remote control.

Cable Box