LG 23LX2R - Manual (Page 13)

InstaUalion
External A/V Source Setup
Connections
Connect the audio/video output jacks on the external AAf
equipment to the corresponding input jacks on the TV.
When connecting the TV to external A/V equipment,
match the jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
Viewing Setup
1. Turn on the external AN equipment
2. Use the TV/VIDEO button on the remote control to
select Video.
3. Operate the corresponding external equipment. Refer
to external equipment operating guide.
: . V . - '
Connections
1. Connect the DVD video outputs to the COMPONENT (Y. P b ,
P r ) Jacks and connect the DVD audio outputs to the AUDIO
jacks.
2. If your DVD only has an S-Video output jack, connect this to
the S-VIDEO input on the TV and connect the DVD audio
outputs to the AUDIO INPUT jacks on the TV. as shown in
the figure.
NOTE: If your DVD player does not have component video
output, use S-Video.
Viewing Setup
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO or yULTMEDIA button on the remote
control to select Component 1 or Component 2 (If connect­
ed to S-VIDEO. select the S-Video input source.)
3. Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to
the component input ports as shown below.
Component ports
of the TV
P b P r
Y Pb Pr
Video output ports / B-Y R-Y
of DVD player Y
Po
@ 0 0 © o o o o
DVD
•••111*]
C')
rn concri
DVD
13