External equipment connections, Connection & viewing setup – LG SXS LRSC 26980TT User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/631834/13/background.png)
Antenna Connection
External Equipment Connections
" Antenna or Cable Service without a Cable Box Connections
■ For optimum picture quality, adjust antenna direction if needed.
After hooking up the connection turn the TV on
and preform a channel search. On the remote
press menu, Auto program will be highlighted,
and then press right(Volume Up)twice.
In a poor signal area to improve picture quality,
purchase and install a signal amplifier.
If the antenna is not installed properly, contact
your dealer for assistance.
VCR Setup
Cable TV Setup
Connection & Viewing Setup
1. Set VCR switch to 3 or 4 and then tune TV to the
same channel number.
2. Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner's manual.
Typical
Arstennas
, -.uu „ ly O O
Connection
Y
nm
'
□0 '
- If your cable service does not require separate converter box please following the
instructions for an antenna connection above.
- For further cable TV information, contact a local cable service provider.
Connection & Viewing Setup
1. Select 3 or 4 with channel switch on cable box.
2. Tune the TV channel to the same selected output
cabiesox
channel of cable box.
3. Select channels at the cable box or
with the cable box remote control.
W