To us€ a manual dry cycle, Maintenance, Operating your dryer – LG TD-V12246E User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATING YOUR DRYER
4. To us€
a
manual dry cycle
• Select a Manual Dry Cycle.
• Press MORE TIME or LESS TIME until the
desired drying time is displayed. Tap MORE TIME
or LESS TIME and the time will change by 1
minute interval.
The
MORE TIME or LESS TIME fealure can be used
with Manual Dry, Time Dry and Rack Dry Cycles.
• lYess TEMP. CONTROL until the desired
temperature indicator glows,
• (OPTIONAL STEP) If desired, select OPTIONS.
Eor more details, see Options,
• Press START/PAUSE, Be sure the door is closed.
• If you do not press START/PAUSE within 10
minutes of selecting the cycle, the dryer
automatically shuts off.
• If you wish to end your drying cycle after pressing
START/PAUSE, press START/PAUSE again.
To stop your dryer at any time
Press START/PAUSE or open the door.
5.
Pausing or restortina
• To pause the dryer at any time;
Open the door or press START/PAUSE,
• To restart the dryer
Close the door. Press START/PAUSE,
■inim
Drying will continue from where the cycle
was interrupted if you close the door and press
START within 10 minutes, it the cycle is
interrupted for more than 10 minutes, the dryer
will shut off. Select new cycle settings before
restarting the dryer.
Maintenance
Clean lint filter
Clean the lint filter after each use and cheek it
before use. Not cleaning or emptying the filter
will increase drying time and energy
consumption, therefore dryer life expectancy
could be shortened after all.
■ Clean the door and its opening
1. Wipe out the door ^
opening. Otherwise,
build-ups of dirty and
foreign objects will
damage sealing of
door.
2. Clean the transparent
glass door to keep
inside view clear
through the glass.
30
1 .Open the door
and pull the filter
straight up.
2.Clean the filter using one of the following methods.
(D Run the fingers
across the filter.
(g) Vacuum the
($)
Wash tl
screen in i
soapy w;
Dry thoroug
replace.