LG TD-V12246E - Manual (Page 16)

ACCESSORIES INSTALLATION
Pedestal Installation Instructions
1
2
Remove pedestal, installation hardware, and
instructions from the shipping carton.
Position dryer on top of the pedestal.
NOTE : Because of the weight of the dryer
two or more people may be needed.
NOTE : If dryer was previously installed,
uninstall it as follows:
A. Uninstalling an electric dryer:
1) Unplug the power supply cord,
2) Pull the dryer away from the wall enough to
loosen the vent clamp. Loosen the clamp and
carefully remove the exhaust vent from the
dryer exhaust outlet.
B. Uninstalling a gas dryer:
1) Shutoff gas.
2) Unplug power cord,
3) Disconnect gas line from dryer.
4) Pull away and loosen vent clamp.
5) Disconnect venting.
4
Attach the double-faced tape of the bracket to the
dryer as shown so the bent parts of the brackets
align wKh the edge and can be attached to the
pedestal with screws.
NOTE : Attach the bottom first.
6
Install the eight (8) screws (supplied) to attach the
brackets to the pedestal.
■>"
I the dryer to
FE : The appliance and pedestal assembly
must be level floor
J o r proper operaElonTAajusnne legs of thej
sneri:
Ltn^edestal while holding the pe
^^^rench. ^ 4
^nt-drV^