LG RU-42PZ61/71 - Manual (Page 11)

Installation
Joinning the TV assembly to the wall to protect the set tumbling
■ Secure the TV assembly by joinning it to a wall by using the TV/Wall brackets.
■ RU-60PZ61 series TV’s stand is saled, separately .
■ Here shown may be somewhat different from your TV.
After the set must be mounted on the desk top, install the
TV brackets on the TV as shown.
Install the TV brackets on the TV as shown.
Insert the 2 bolts and tighten securely, in the upper holes
on the bracket.
Install the wall brackets on the wall with 4 bolts*, (not
supplied with the product), as shown.
Match the height of the TV brackets and the wall brack­
ets.
Check to be sure the brackets are tightened securely.
• Secure the TV assembly to the wall with strong strings
or wound wire cables, (not supplied with the product), as
shown.
Speakers mounted on the monitor
RU-60PZ61 series TV’s speaker is saled, separately .
■ Here shown may be somewhat different from your TV.
Mounting speakers on TV
Assemble the monitor to speaker with using the supporter
hanger and bolt. As shown above A, Assemble the a, b to
the TV with using the bolt.
If the bolts are tightened too much, the product could be
damaged.
Caution: Always lift the TV itself (not the speakers) when
handling or moving the monitor after speakers
have been installed.
supporter hanger -
Connecting Speakers to the Monitor using the speaker wires provided.
Place the speakers in the position you want. Install the
speaker wires on the TV and speaker. Be sure to connect
the positive “+” wire to the “+” input and the negative
wire to the input. Connect left monitor input to left
speaker and right monitor input to right speaker. Any extra
speaker wire length remaining can be bunched into the
wire holders provided, see© above to install wire hold­
ers. (Caution: Once installed, the speaker wire holders
lock into position and can’t be removed.)
Caution: Be sure TV power is turned off before making
any connections.
Owner’s Manual 11