LG RU-42PX10C - Manual (Page 36)

External Control Device Setup
09. Color (Command2:i)
► To adjust the screen color.
You can also adjust color In the Picture menu.
Transmission
][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping 1’. See page 35.
Acknowledgement
][Set ID][ ][OK][Data][x]
10. Tint (Command2:j)
► To adjust the screen tint.
You can also adjust tint In the Picture menu.
Transmission
][SetlD][ ][Data][Cr]
Data Red : 0 ~ Green : 64
• Refer to ‘Real data mapping 1’. See page 35.
Acknowledgement
][Set ID][ ][OK][Data][x]
11. Sharpness (Command2:k)
► To adjust the screen sharpness.
You can also adjust sharpness In the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping 1’. See page 35.
Acknowledgement
[k][ ][SetlD][ ][OK][Data][x]
12. OSD Select (Command2:l)
► To select OSD (On Screen Display) on/off.
Transmission
][SetlD][ ][Data][Cr]
Data 0: OSD off
Acknowledgement
1: OSD on
][Sef ID][ ][OK][Data][x]
13. Remote Control Lock Mode (Command2:m)
► To lock the remote control and the front panel controls on
the monitor.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off
Acknowledgement
1: Lock on
[m][ ][Sef ID][ ][OK][Data][x]
• If you're not using the remote control and front panel controls
on the monitor, use this mode. When main power Is on/off,
remote control lock Is released.
14. PIP / DW(Command2:n)
► To control the PIP (Picture In plcture)/DW (Double Window).
You can also control the PIP/DW using the PIP/DW button
on the remote control or In the PIP/DW menu.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0: PIP/DW off 2: DW1
1: PIP 3: DW2
Acknowledgement
[n][ ][Sef ID][ ][OK][Dafa][x]
15. Split Zoom (Command2:p)
► To operate split zoom function and select the split
zoom section number.
Transmission
[k][p][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max:99
• Refer to ‘Real data mapping 2’.
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
* Real data mapping 2
0 : Reset split zoom
21: Selection 1 of 2 spllf zoom
24: Selection 4 of 2 spllf zoom
41: Selection 1 of 4 spllf zoom
42: Selection 2 of 4 spllf zoom
44: Selection 4 of 4 spllf zoom
45: Selection 5 of 4 spllf zoom
91: Selection 1 of 9 spllf zoom
99: Selection 9 of 9 spllf zoom
16. PIP Position (Command2:q)
► To select sub picture position for PIP.
You can also adjust the sub picture position using
WIN.POSITION on the remote control or In the PIP/DW menu.
Transmission
[k][q][ ][SetlD][ ][Data][Cr]
Data 0: Right down on screen
1: Left down on screen
2: Left up on screen
3: Right up on screen
Acknowledgement
[q][ ][SetlD][ ][OK][Data][x]
17. Treble (Command2:r)
► To adjust treble.
You can also adjust treble In the Sound menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping 1'. See page 35.
Acknowledgement
[r][ ][SetlD][ ][OK][Data][x]
36 Plasma TV