Sony CPD-100VS - Manual (Page 20)

.
Power Saving Function
This monitor meets the power saving guidelines set by the International
ENERGY S
tar Program. It is capable of reduced power consumption
when used with a computer equipped with Display Power Management
Signaling (DPMS). By sensing the absence of the sync signal coming
from the computer, it will reduce the power consumption as follows;
%/ CAUTION
The Power Saving function will automatically put the monitor Into ActIve-off state if the
power switch is turned on without any video signal input. Once the horizontal and vertical
syncs are sensed, the monitor will automatically return to its Normal operation state.
State Power Required Ò Power Speaker
consumption resumption time indicator
130 W (max) — 1 Normal
operation
2 Suspend (1st step 15 W (max)'*
of power saving)
3 Active-off (2nd 8 W (max)
step of power
saving)
4 Power-off Approx. 6 W-"
Green
Approx. 3 sec. Green •«—►
Orange
Approx. 10 sec. Orange
Off
On
OfP>
OfF>
Off
Notes
1) When the audio circuitry is inactive.
2) The audio circuitry will constantly be active as long as the monitor keeps receiving the
audio signal Including noise.
When the audio signal is completely shut down, the audio circuitry will be
automatically turned off after 30 seconds. Once turned off, the audio circuitry will not
be active again until the monitor returns to its Normal operation state.
3) To lower the power consumption to 0 W, disconnect the power cord.
2Q Power Saving Function