Setting the color temperature – Sony CPD-100VS User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the color temperature
The selected color temperature becomes the common setting for all input
signals.
1. Press the button.
The OSD appears.
2
.
50
5000K 9300K
Adjust with the Q +/- and ® +/- buttons.
To select 5000K or 9300K
Press 3 +/- buttons.
The selected color temperature is indicated in yellow.
+ to select 9300K
- to select 5000K
To obtain the desired color temperature between 5000K and
9300K
Press Ó +/- buttons.
+ for higher temperature
- for lower temperature
o
Tip
The first press of -P; + or - button recalls the color temperature which was obtained at the
last adjustment.
To exit the OSD
Press the button again.
Tip
If you don't touch any button, the OSD automatically disappears after 20 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected
item appears.
^ g Adjustments