Sony CPD-100VS - Manual (Page 13)

Adjustments
When one of the preset-type signals is input, no picture adjustment is
necessary.
You can, however, adjust the picture to your preference by following the
procedure described below.
To adjust the monitor, turn on the monitor and computer.
Select the adjustment item. You can adjust all items except sound
controls via the OSD (On Screen Display).
Adjustments are automatically stored in the monitor's memory.
Control Panel
Adjusting the picture brightness
The adjustment data becomes the common setting for all input signals.
1. Press the 'Q- + or - button.
The " p- U" OSD appears.
32
2. Press the Q +/- buttons to adjust the picture brightness.
+ for more brightness
- for less brightness
o
The" P CJ" OSD disappears 2 seconds after you release the buttons.
Adjustments 13