Craftsman 509347 - Manual (Page 20)

20
Replacing Handle
1. Remove screw “A” from handle assem-
bly.
2. Remove trim handle “B”.
3. Remove screw “C” and lockwasher “D”.
Yoke handle “E” should then be removed.
4. Remove the bevel indicator and screw
attached to the yoke handle (“E”). Reinstall
these pieces on the new handle.
5. Attach new handle reusing screw “C” and
lockwasher “D”.
A B
C
D
E
D
C
NEW HANDLE ASSEMBLY
OLD HANDLE ASSEMBLY
Assembly