Sony TC-WR565 - Manual (Page 9)

Advanced Playback Operations
Creating Your Own Program
(RMS Play)
By creating a program, you can play back tracks on
deck A in any order that you want. The Random
Music Sensor (RMS) function lets you create a program
of up to 28 tracks, from the 1st to the 14th tracks on
each side of the tape.
RMS/START SET CHECK
Qa
Ò
0 J3Q . BE-
3_aQ.
o / t>
1 Press RMS/START.
"RMS" and a flashing cursor appear in the display.
2 Press
of the tape.
"<]" or "O" appears in the display.
3 Press or ►► repeatedly until the track number
you want appears in the display.
Side of the cassette
Track number
4 Press SET to store your selection.
To program the same track again, press SET once
more.
ll J L
= t O N T
Ì M S )
À C K
1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4
---- Track number
Order on the program
5
Repeat Steps 2 to 4 to program more tracks.
If "FULL" appears in the display
This means that veu'\'e alread\' programmed 2S tracks
and can't program an\' more.
6 Press RMS/STAK'P to start RMS !ha\c
The peak k'vi'l meters appear in the liisplav.
To stop RMS Play
Press ■ (CLEAR) once. The RMS program still remains.
To cancel RMS Play
Press ■ (CLEAR) repeatedly until the peak level meters appear
in the display or eject the tape in deck A. When RMS Play is
canceled, the RMS program is automatically erased.
To alternate between the RMS and peak level meter
displays
Press DISPL AY.
'rt' You can play the program again after RMS Play ends
* Press RMS/START.
Notes
• During RMS play, you can only use CHECK, DISPLAY, ■
on deck A, and ■, ►► on deck B.
• The RMS function may not work properly if a blank space
between tracks is short.
• If there is a long blank space between tracks, the deck may
fast-forward a portion of the blank space.
• If your program includes a number for a track that does not
exist, the deck will skip that number during RMS Play.
Checking the order of tracks in the program
Press CHECK.
Each time you press this button, the display shows the
track numbers in the order they were programmed.
After the last track in the program, "End" appears in
the display.
Adding tracks to the end of a program
Press ■ (CLEAR) once, and follow Steps 2 to 5 in
"Creating Your Own Program (RMS Play)" on this
page.
'Q' To create another program
Press ■ (CLEAR) until the order on the program returns
to 0 and the cursor flashes above track number 1 in the
display, then follow Steps 2 to 5.
You can use your Sony remote to perform RMS
programming
If your Sony stereo receiver's remote has RMS buttons, do
the following steps.
1 Turn on the receiver and press TAPE.
2 Press RMS/START.
3 Press or to select the front or reverse side ol the
tape, and the number keys and the >10 key to specify
the tracks.
4 Press RMS/START again to start RMS I’lav.
Note
For more ink>rmalion on the availability ol Sony stereo
receiver remotes with RMS capability, contact rour
nrMivst Sony rleak’r.