Playing a tape, To play back, Set to – Sony TC-WR565 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operations
playing a Tape
2
3 4
See page 7 for hookup
information.
You can use either deck for
playback.
*Q' To adjust the pitch
PITCH
CONTPO^-
pULL
w
Pull the PITCH CONTROL
knob out and turn it clockwise
to raise the pitch, or counter
clockwise to knver it. You can
adjust it during playback on
deck A or normal-speed
dubbing. Push the knob back
in when not using.
.jAi, To play a tape recorded
V with the Dolby NR system
Set DOLBY MR to ON and
select the same position that
the tape was recorded in—B,
C, or S rrC-VVR065S only).
V
You can connect the
headphones to PHONES
1
Turn on the amplifier and select the tape deck position.
To play back
Set to
One side only
Both sides continuously*
Both decks in succession*
RELAY
* The deck automatically stops after playing back five times.
Press [>.
The deck starts playing. Adjust the volume on the amplifier.
To
Press
Stop playing
■
Start playback from the rc\'crsc side
<3
Pause (deck B only)
II P.AUSL. Press the button again to
resume play
Fast-forward or rewind
►► or
MM
whcMi the deck is sloppt'd
Take out the cassette
after slopping playing