beautypg.com

Sony MDS-JA3ES User Manual

Labeling recordings (title function), Editing recorded mds

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Editing Recorded MDs

Labeling Recordings (Title
Function)

You can create titles for your recorded MDs and tracks.

Titles — which may consist of uppercase and

lowercase letters, numbers and symbols for a

maximum of about 1,700 characters per disc — appear

in the display during MD operation.

Use the following procedure to label a track or an MD.
You can label a track while it is playing, pausing or

recording. If the track is playing, be sure to finish

labeling before the track ends. If the track ends
before you've completed the labeling procedure,

the characters already entered are not recorded and
the track will remain unlabeled.

1

Press EDIT /NO repeatedly until "Name in ?"

appears in the display, then do the following;

To label

Make sure that the deck is

A track

Playing, pausing, recording the track
to be labeled, or stopped after
locating the track to be labeled

An MD

Stopped with no track number
appearing in the display

2

Press YES.

A flashing cursor appears in the display.

«

5

6 7 8 g 10

11 12 13 14 IS

It 17 18

3

Tum AMS to select the first character.

6 7 8 0 to

11 12 13 14 IS

16 17 It

The selected character flashes.

Letters, numbers, and symbols appear in sequential

order as you turn AMS.

You can use the following symbols in titles:

! " # $ % & ' ( ) * + , - . / : ; < = > ? © _ '

Press AMS to enter the selected character.

The cursor shifts rightward and waits for the input

of the next character.

6 7 8 0 10

11 12 13 14 IS

to 17 16

5

Repeat Steps 3 and 4 until you have entered the

entire title.

If you entered the wrong character

Press ◄◄ or ►► until the character to be corrected starts
flashing, and repeat Steps 3 and 4 to enter the correct
character.

To erase a character

Press •♦O or ►► until the character to be erased starts
flashing, then press EDIT/NO.

To enter a space

Press AMS or ►► while the cursor is flashing.

6

Press YES.

This completes the labeling procedure and the title

appears on the left side of the display.

To cancel labeling

Press ■.

Note

You cannot label a track or an MD while you are recording
over an existing track.

28