Sony TC-WE435 - Manual (Page 7)

Basic Operations
*Q* To protect recordings
against accidental erasure
Break out the record-protect
tab(s) (see page 14).
V The Dolby HX Pro*
automatically works during
recording
Distortion arid noise in the
high-frequency response are
reduced to produce high-
quality sound that can be
enjoyed even during
playback on other tape decks.
Note
Even after adjusting the recording
level, distortion may occur
depending on the source that
you're recording from. If this
happens, turn REC LEVEL
counterclockwise to lower the
level.
HX Pro headroom extension
originated by Bang & Olufsen
and manufactured under
license from Dolby Laboratories
Licensing Corporation.
"DOLBY", the double-D
symbol □□ and "HX Pro" are
trademarks of Dolby
Laboratories Licensing
Corporation.
1“ Press PAUSE II or O.
Recording starts.
^ Start playing the program source.
Do not turn off the deck during operation.
To Press
Stop recording ■
Start recording from the reverse side <] twice in Step 5
Pause PAUSE II. Press the button again to
resume recording.
Take out the cassette = after stopping recording
Use the following selector and control to perform additional
operations
DOLBY NR REC LEVEL
To record with the Dolby NR
Set DOLBY NR to B or C before you start recording.
To adjust the recording level manually
After pressing REC # in Step 4 on page 6, turn
REC LEVEL so that the peak level meters reach
the recommended level for the corresponding
tape type. After completing the adjustment, stop
playing the program source, then continue the
procedure from Step 5.
ae-« -30 -20
For type I or ___
type II tape
For type IV tape