Sony KP-48V80 - Manual (Page 37)

0 Using the Timer Menu
After setting the clock you can use the timer
to turn the projection TV on and off.
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 29.
To select the Timer © menu:
Highlight © ' Display Select
Tip V
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
Daylight Savings
Automatically
adjusts the lime.
Current Time
Necessary for the
Timer.
On/Off Timer
Wake up or
scheduled viewing.
Spring: Select Yes to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
Fall; Select No at the end of Daylight Saving Time.
The current time moves back one hour.
1 Press V , then move the joystick up or down until
the current day (Sun - Sat) is displayed, and press
©.
2 Move the joystick up or down until the current hour
(1-12) and AM/PM is displayed, and press © .
3 Move the joystick up or down until the current minute
(00-59) is displayed, and press © ,
The clock has now started. Press MENU to exit.
13
2:00AM
Select ft Exit
1 Move the joystick up or down until the desired day or
range of days (Every Sun-Sat, Every Mon-Fri,
Sunday, Monday, ....Saturday, Every Sunday,
....Every Saturday) is displayed, and press © .
2 Move the joystick up or down until the time (hours
and minutes) that you want the projection TV to
remain on is displayed, and then press © .
3 Move the joystick up or down to set the time duration (maximum of 6 hours)
and press © .
4 Move the joystick up or down to select the desired channel and press © .
The timer is now set. The TIMER/STAND BY indicator on your projection TV
will be lit.
Press MENU to exit. To cancel your timer setting, press RESET while in the
On/Otf Timer window. Performing Auto Program will erase all Timer settings.
33