Sony KP-48V80 - Manual (Page 26)

Usinq Ycur New Projection TV (continued)
»^f using the Whtte Labeled Buttons for Projection TV Operations
TVA'IDEO
JUMP
FREEZE
(yellow labeled
button!
DISPLAY
Press repeatedly to scroll through available video inputs:
TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4 and VIDEO 5.
If you select "Skip” as a "Video Label" in the Set Up menu, your projection
TV will skip the video input you selected, (see "Video Label" on page 39)
Press to alternate or jump back and forth between two channels. The
projection TV will jump between the current channel and the last channel
selected using the 0-9 buttons.
This is useful when you need to copy down information that appears on the
TV’s screen.
Press to freeze the desired picture. The frozen picture is displayed on the left
of the screen while viewing the normal picture of the current channel on the
right.
Frozen picture Normal motion
picture
Press again to display the normal picture.
Press to display the channel number, current time, channel caption (if set),
and MTS mode (if SAP is selected). The SAP indication disappears and the
other indications dim three seconds later.
To turn the display off, press DISPLAY again.
Tip V
Some control buttons are located under the cover on the
top of the remote control. They are indicated with
(under the cover) in the table.
22