Adjusting your set up (menus) (continued) – Sony KP-48V80 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting Your SET UP (menus) (continued)
Speaker
Se CClhV!
ct .iudic cutout
scufce
On:
Select to listen to the sound from the projection TV speakers alone.
Off:
Select to turn off the projection TV speakers and listen to the
projection TV's sound only through an external audio system's speakers.
SAVA SP:
Select to turn off the projection TV speakers and listen to the projection
TV’s sound only through the Sony SAVA series speaker system. You can
adjust volume, muting, “Surround Mode,” and “Super Woofer Mode” with the
projection TV’s remote control, (see “SAVA SP Control” below)
Center:
Select to use the projection TV as center speaker
when you connect an amplifier with a Dolby Pro Logic decoder, (see
“Connecting an amplifier that supports Dolby Pro Logic decoder” on page 15)
Audio Out
Easy control of
volume adjustment
“Audio Out” can only be set when “Speaker” is set to “Off.”
Fixed:
Sound output is held at a fixed level through the audio system.
Use the AV receiver’s remote control to adjust the volume.
Variable:
Sound output varies according to the TV settings.
Useful when you want to use your remote control to control the output of a
separate audio system.
SAVA SP Control
Controls Sony
SA VA speaker's
mode.
’’SAVA SP Control” can only be set when Sony SAVA speaker system is
connected to the AUDIO (VAR/FIX) OUT connectors and “Speaker” is set to
“SAVA SP.” (see “Speaker” above)
You can also adjust the SAVA speaker’s volume using VOL +/- of the projection
TV’s remote control.
Surround Mode:
Select to activate the SAVA Speaker’s surround mode.
Super Woofer Mode:
Select to activate the SAVA Speaker’s super woofer mode.
32