Connecting a dvd player (upper, Illustration), Notes – Sony KP-48V80 User Manual
Page 16: Connecting a dvd player
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KKS Installing and Connecting the Projection TV (continued)
Connecting a DVD Player (Upper
^
illustration)
Using an AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO IN on the
projection TV to AUDIO and S VIDEO OUT
on the DVD Tlayer (White-AUDIO Left, Red-
AUDIO Right).
Connecting a DVD Player with
component video output
connectors (Lower illustration)
1
Using an AUDIO cable, connect AUDIO of
LINE OUT on the DVD Player to AUDIO of
VIDEO 4 or 5 IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
2
Using three yellow VIDEO cables, connect
Y, P
b
,
and
P
r
of COMPONENT VIDEO
OUT on the DVD Player to Y,
P
b
,
and
P
r
of
VIDEO 4 or 5 IN on the projection TV.
Notes:
• Since the high quality pictures on a DVD
disc contain a lot of information, picture
noise may appear. In this case, adjust "Noise
Reduction" in the Video menu, (see "Noise
Reduction" on page 30)
• Some DVD Player terminals may be labeled
differently. If so, connect as follows:
Cormect Y (green) to Y.
Cormect P
b
(blue) to C
b
, Cb or B-Y.
Cormect
P
r
(red) to
C
r
,
Cr or R-Y.
12
Disconnect all power sources before making any connections.