Sony LBT-D690 - Manual (Page 40)

Specifications
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION;
With 8 ohm loads, both channels driven, from
70 - 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
Continuous RMS power output
(LBT-D290 / D590 / D690 / G3300)
Canadian model:
100 + 100 watts
(8 ohms at 1 kHz, 5%)
(LBT-XB3/XB3K) 70 + 70 watts
(6 ohms at 1 kHz, 10%
THD)
(LBT-XB4/XB4K) 80 + 80 watts
(5 ohms at 1 kHz, 10%
THD)
(LBT-XB600/XB6/XB6K) 100+ 100 watts
(8 ohms at 1 kHz, 10%
THD)
Peak music power output
(LBT-XB3/ XB3K)
1000 watts
(LBT-XB4/XB4K) 1200 watts
(LBT-XB600 / XB6 / XB6K) 1400 watts
Inputs
PHONO IN (phono jacks):
sensitivity 3 mV,
impedance 47 kilohms
VIDEO (AUDIO) IN (phono jacks):
sensitivity 250 mV,
impedance 47 kilohms
MIX MIC (phone jack): sensitivity 1 mV,
impedance 10 kilohms
Outputs
PHONES (stereo phone jack):
accepts headphones of 8
ohms or more
SPEAKER:
(LBT-D290 / D590 / D690 / G3300 / XB600 / XB6/ XB6K)
accepts impedance of 8 to
16 ohms.
(LBT-XB3 / XB3K) accepts impedance of 6 to
16 ohms.
(LBT-XB4/XB4K) accepts impedance of 5 to
16 ohms.
SURROUND SPEAKER
(LBT-D590
1 D690 1 XB600 ( XB6 / XB6K only)
accepts impedance of 16
ohms
CD player section
System
Laser
Laser output
Compact disc and digital
audio system
Semiconductor laser
(X = 780nm)
Emission
duration: continuous
Max. 44.6 jUF*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
W avelength 780 - 790 nm
Frequency response 2 Hz - 20 kHz (±0.5 dB)
Signal-to-noise ratio More than 90 dB
Dynamic range
More than 90 dB
Tape player section
Recording system 4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
60 - 13,000 Hz ( ±3 dB),
using a Sony TYPE I
cassette
60-14,000 Hz(±3 dB),
using a Sony TYPE II
cassette
Wow and flutter ±0.15% W. Peak (lEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Tuner section
FM stereo, FM / AM superheterodyne tuner
FM tuner section
Tuning range
North American model:
Other models:
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
North American model:
87.5 -108.0 MHz
(100 kHz step)
87.5 -108.0 MHz
(50 kHz step)
FM wire antenna
75 ohm unbalanced
10.7 MHz
Other models:
Antenna
Intermediate frequency
530 -1,710 kHz
(with the tuning interval
set at 10 kHz)
531 -1,710 kHz
(with the tuning interval
set at 9 kHz)
531 -1,602 kHz
(with the tuning interval
set at 9 kHz)
530 -1,710 kHz
(with the tuning interval
set at 10 kHz)
AM loop antenna.
External antenna
terminals
450 kHz
40