Sony SRS-D300 - Manual (Page 7)

On operating voltage
Operate the unit only on 120V AC, 60Hz.
On safety
•The nameplate indicating operating voltage,
power consumption, etc. is located on the rear
exterior of the woofer.
• Unplug the unit from the wall outlet when it is
not to be used ft>r an extended period of time. To
disconnect the cord, pull it out by grasping the
plug. Ne\’er pull it out by the cord.
• Should anv solid object or liquid fall into the unit,
disconnect the AC power cord, and ha\ e the unit
checked bv qualified personnel before operating it
anv further.
On installation
• Do not lea\ e the unit in a location near heat
sources, moi.-^turo, rain, or mechanical shock.
• Although this speaker system is magnetically
shielded, do npersonal credit cards, or floppy disks using
magnetic coding in front of the unit for an
extended period for precaution.
On cleaning the cabinet
Clean the cabinet with a soft cloth slightlv
moistened v\'ith water ('r mild detergent solution.
D(.i not use alcohol, benzine, or thinner as t!u‘\’ mav
mar the finish.
Precautions
If the TV picture or monitor display is
magnetically distorted
Although this s\ stem is magnetically shielded,
there may be cases that the picture on some TV
sets/personal computer sets mav become
magnetically distorted. In such a case, turn off the
power i)f the TV set/personal computer set once,
and after 15 to .50 nunutes turn it on again. For the
personal computer set, take the appropriate
measures such as data storage before turning it off.
When there seems to be no improvement locate
the system further awav from the TV set/personal
computer set. Furthermore, be sure not to place
objects in which niagnets are attached or used near
the '] V set/personal computer set, such as audio
racks, TV stands, hn’s, etc. These mav cause
magnetic distortitui to the pic^uгe due to their
interactiiMi with tlie ^^’stern.
if \ oLi ha\‘e an\ questit^ns or pr<_)hlems concerning
voLir s\'stem that are not co\ ered in this manual,
please ctmsult \'our nearest Scniv’ dealer.
Troubleshooting Guide
Should any problem persist ufter you have made
the folknvini; checks, consult your nearest Sonv
serx ice facilitx.
Trouble
\o sound at. all
No bass sound
No stuind from one channel
Distiii'tion
Cause and/or remedy
Connect the ,-\C power cord ty> a wall outlet
Set the I’OWHK switch to ON.
Check the IM'CT Sid kCT switch setting,
I urn the VOI L'MFi control cl('ckv\ ise.
Increasi' the sound \ cdume with the u>lume a>ntrc’l on the connected equipment.
Check the connecti'd ei.[uipmeni,
• Is the ek|iiipment turned oiC
♦ 1s operation of the connected equipment correct?
Check to see if the headphones is Ck>nnccted to the . . (headplumesl jack,
rurn the BASS id'VF.I. control dockwise.
Check to see if the' uxHifer/amplifier is connected to the motiaural earphoiH' jack. If it is
connected, List.' th«.- I’C'daO K- plug ariaplor to ad.ipf "tereo mini plug tt’ the nu''naural
mini pliig.
Clieck the satellite speakers connecting.
Turn dow'n the volume of the connected equipnu'nl.
Turn dow'n tile BASS LFV'l'l. control.