To lock an unlocked system, Set locks and limits – Sony SAT-A4 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Locking Your System
DON'T FORGET YOUR PASSCODE.
You'll need this number to unlock your
system or to make any changes to the locks
and limits you've set. If you do foryet your
passcode, call your proy^ram provider for
assistance.
Overriding the Systerri Lock
To lock an unlocked system;
1
Select LOCK from the Set Locks and Limits screen.
2
Enter a four-digit passcode number. Use the 0-9 buttons to enter
the numerical value.
SET LOCKS AND LIMITS
SPENDING LIMIT
RATINGS LIMIT R
LOCK SYSTEM
Enter Your Four
Digit Passcode
RETURN
PAY PER VIEW
HELP
STATION LOCKS
UNLOCKED
4 STATIONS LOCKED
Each number you enter appears as an asterisk (■*■), which keeps
your passcode secret.
3
When prompted, enter your passcode again. (This confirms your
selection of a passcode number.)
Your system is now locked, as indicated by the ckrsed padlock (fl ) in
the Set Locks and Limits screen. All locks and limits you've set arc now
in effect. The padlock also appears in the Program Banner to remind
you of the locked status.
You can temporarily override any locks or limits that have been set if
you know the system passcode.
For example, if you try to watch a program on a locked station, a
message identifies the lock or limit exceeded. After you press the
button, the Temporary Unlock window appears. By entering the
passcode and then selecting when you want the system to
automatically relock, you can temporarily unlock the system.
Note
If you override the system lock, you can reset the lock by turning the power off
and then on again. If you want to unlock the system on a more permanent
basis, follow the procedures under “Unlocking Your System" on page
53.
52