Hookup 1 (plug and play), Antenna hookup, A use this hookup if you are using – Sony SLV-N77 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hookup 1 (Plug and Play)
Antenna hookup
Make the following connections if you are using an antenna (if you do not have cable
TV).
A Use this hookup if you are using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
Rear of TV
VHF/UHF
----- @ A Match the type of
connector on your
VHF TV: A, B, or C.
B
UHF
VHF
UHF
B Use this hookup if you are using a VHF-only antenna (you get
channels 2-13 only)
Rear of TV
VHF/UHF
@ A Match the type of
connector on your
TV: A, B, or C.
VHF
'^fel B Forconnectortypes
^ B and C, no UHF
connection is
required.
UHF
VHF
UHF
if you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the RF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied) (page 61).
12 Hookups